Teejet 801 flowmeter Bedienungsanleitung PDF herunterladen (Seite 1)

www.teejet.com

INSTA L L AT I O N

Please read before installing this equipment. Failure to do so may void your warranty.

Ins tallation

The 801 ow meter gives the best accuracy when there is a smooth, unobstructed

ow through it. To minimize turbulance, there should be at least twelve inches of

straight plumbing upstream from the ow meter and at least 6 inches of straight

plumbing downstream from the ow meter. Mount the ow meter in a location that

physically protects it from damage and allows liquid to drain away after the sprayer is

ushed and secured at the end of the operating day. A straight, vertical section of the

main boom supply line is the ideal location for the ow meter.

Keep the ow meter from lying in a low section of the sprayer plumbing. This is

particularly important in cold weather when water might freeze in the ow meter and

cause damage to the unit. It is also important when applying chemical suspensions

which may settle out and stall the ow meter turbine if they cannot drain away.

Before installing the ow meter insert, make sure there are no obstructions in the

insert cavity. Clearance at the bottom of the cavity is very close and over tightening

or compressing of foreign material in the cavity can cause damage to the ow meter

body. Turn the insert in until it is hand tight.

Prior to each day’s spraying, the ow meter should be inspected to ensure there are

no leaks around the attachment ttings. At the end of the day, care should be taken

to thoroughly ush the ow meter with clean water.

Make sure no water or sediment is trapped in the flow meter

The impeller type ow meters supplied by TeeJet Technologies are inherently rugged.

However, continued use over time will eventually wear the internal bearings and

shafts until the meter becomes inaccurate. Replacement kits are available to repair

the ow meters. Contact your TeeJet Technologies dealer for these parts.

8 0 1 f L O w m e T e r

INSTALLATION, SpecIfIcATION, ANd wArrANTy INfOrmATION

8 0 1 F L O W M E T E R

TeeJet

O-RING

BOLT

HOSE

BARB

FLOW METER

SENSOR

MAIN

FLOW METER

BODY

FLANGED

CLAMP

Flow Meter

Insert

Main Flow

Meter Body

Flanged

Clamp

Bolt

O-Ring

Hose

Barb

TeeJet

>12 inches

> 6 inches

MAIN PRODUCT

PUMP

BYPASS LINE

AUTO RANGE

VALVE

PUMP DISCHARGE

FLOW METER

TO BOOMS

NOTE: The ow meter must be

mounted to that it will drain

completely when the sprayer

is not operating.

Bypass Line

Main Product

Pump

Pump Discharge

Flow Meter

>12 inches

Auto Range®

Valve

>6 inches

To Booms

NOTE: The Flow

Meter must be mounted

so that it will drain

completely when the

sprayer is not operating

Housing, Deutsch 3 Pos/Skts

Pin Out Color Function

A Red +12V

B White Signal

C Black Ground

Sensor

1 2

Inhaltsverzeichnis

Seite 1 - 8 0 1 f L O w m e T e r

www.teejet.comINSTA L L AT I O NPlease read before installing this equipment. Failure to do so may void your warranty.Ins tallationThe 801 ow meter g

Seite 2 - Warranty

98-01087-R3© TeeJet Technologies 2011TeeJet Technologies 1801 Business Park DriveSpringeld, Illinois 62703 USATel: (217) 747-0235 • Fax: (217) 753

Kommentare zu diesen Handbüchern

Keine Kommentare

Teejet 801 flowmeter Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computers Teejet 801 flowmeter herunter. TeeJet 801 flowmeter User Manual [en] [de] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Teejet 801 flowmeter Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computers Teejet 801 flowmeter herunter. TeeJet 801 flowmeter User Manual [en] [de] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Teejet 801 flowmeter