Teejet 834 Sprayer Control Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computers Teejet 834 Sprayer Control herunter. TeeJet 834 Sprayer Control User Manual [en] [pl] [cs] [de] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 15
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
MI 834 Programming and Operating Manual 9/99 Page 1 of 15
Tee
J
et
®
834
Sprayer Control
Programming and Operating Manual
U2.12
98-70004
R0
Seitenansicht 0
1 2 3 4 5 6 ... 14 15

Inhaltsverzeichnis

Seite 1 - Sprayer Control

MI 834 Programming and Operating Manual 9/99 Page 1 of 15 TeeJet® 834 Sprayer Control Programming and Operating Manual U2.12 98-70

Seite 2 - Table of Contents

MI 834 Programming and Operating Manual 9/99 Page 10 of 15 SPEED DISPLAY In this display the speed is shown in MPH. Press the key

Seite 3

MI 834 Programming and Operating Manual 9/99 Page 11 of 15 TIP SELECTION DISPLAY This display is the tip selection display. On the display

Seite 4

MI 834 Programming and Operating Manual 9/99 Page 12 of 15 Programmable Tip As mentioned above the _P section of the Tip Selection Displa

Seite 5 - System Setup Mode

MI 834 Programming and Operating Manual 9/99 Page 13 of 15 Operating Instructions SPRAYER CHECKOUT Before spraying check all connections re

Seite 6 - Auto Calibration

MI 834 Programming and Operating Manual 9/99 Page 14 of 15 THE SPRAYING OPERATION You have filled the sprayer tank and have thoroughly mix

Seite 7 - Simulated Speed

MI 834 Programming and Operating Manual 9/99 Page 15 of 15 Alarms and Warnings On the 834 Console there are three LED's for indication

Seite 8

MI 834 Programming and Operating Manual 9/99 Page 2 of 15 Table of Contents Programming Guidelines ____________________________________

Seite 9 - Normal Working Mode

MI 834 Programming and Operating Manual 9/99 Page 3 of 15 Programming Guidelines Make sure that all hardware components are properly instal

Seite 10 - RESSURE

MI 834 Programming and Operating Manual 9/99 Page 4 of 15 Start To begin the programming process: ☛ Be sure the Master boom switch is “OFF.

Seite 11 - ELECTION

MI 834 Programming and Operating Manual 9/99 Page 5 of 15 System Setup Mode The System Setup Mode contains the programming steps that cust

Seite 12 - Programmable Tip

MI 834 Programming and Operating Manual 9/99 Page 6 of 15 press the key to advance to the next step. SPEED SENSOR CALIBRATION De

Seite 13

MI 834 Programming and Operating Manual 9/99 Page 7 of 15 Radar A radar speed sensor will be indicated with an "r" on the displa

Seite 14 - PERATION

MI 834 Programming and Operating Manual 9/99 Page 8 of 15 TIP SPACING Default = 20 inches Use the + or keys to adjust this value. Once t

Seite 15 - Alarms and Warnings

MI 834 Programming and Operating Manual 9/99 Page 9 of 15 Normal Working Mode INTRODUCTION In normal working mode, the display can show fou

Kommentare zu diesen Handbüchern

Keine Kommentare