Teejet CenterLine v1.10 Bedienungsanleitung PDF herunterladen (Seite 12)

8 CenterLine

CenterLine Quick Start-up

CenterLine

Software Version 1.10

CenterLine Quick Start-up

The following section assumes that your CenterLine hardware has been properly set up. See

“CenterLine Product Kits” on page 9 - 12 for information on how to configure the system.

General Start-up Sequence

• Apply power to CenterLine.

• Lightbar performs a start-up sequence.

• Lightbar displays current software version.

• Lightbar displays <START>.

• <START> display should remain until Enter is pressed to start real-time guidance or the Start

menu is scrolled, using Up or Down to move to another menu option; <SETUP> or <TOOLS>.

First Time Start-up Sequence

• Apply power to CenterLine.

• Lightbar performs a start-up sequence.

• Lightbar displays current software version.

• Lightbar displays <START>.

• Using Up or Down, scroll until <SETUP> is displayed on the lightbar. Press Enter.

• Set up the CenterLine system by choosing the proper selections found in the three setup sub-

menus <GUIDANCE>, <LIGHTBAR>, and <SYSTEM>. It is important to have the correct

swath width entered.

• Return to the <START> location and press Enter to begin real-time guidance.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 57 58

Keine Kommentare

Teejet CenterLine v1.10 Bedienungsanleitung Seite 12