Teejet FENDT-INTERFACE Bedienungsanleitung PDF herunterladen (Seite 3)

3: Monitor-cable. Each wire is provided with a number which corresponds to the

numbers of the plugs on the rear of the monitor.

4: Socket for connection of an external area counting on/off sensor.

PIN FUNCTION

1 Signal

2 + 12 Volt (output for sensor)

3 0 Volt

SWITCH 1:

This switch changes between stop of area counting by the lift or by an external sensor (see plug

4 above).

Signal from external sensor.

Signal from lift.

SWITCH 2:

This switch chooses which speed sensor is to be used.

Signal from gear box (wheel).

Signal from radar (if mounted).

1 2 3 4

Keine Kommentare

Teejet FENDT-INTERFACE Bedienungsanleitung Seite 3