Teejet IC18 SPRAYER JOB COMPUTER Bedienungsanleitung PDF herunterladen (Seite 8)

98-05204 R1 UK

OVERVIEWSETUPAPPENDIX GETTING STARTEDOPERATION

ISOBUS Job Computer : IC18 Sprayer

CHAPTER 2 – GETTING STARTED

• A rm touch is required when selecting a screen icon.

• Settings are NOT automatically saved when selected. The ACCEPT KEY must be selected to save the setting. Select the

ESCAPE KEY to escape without saving settings and return to the previous menu.

• The console needs to be cycled off and back on when changing or attaching equipment to the system.

• The menu structure on your display might vary from the one displayed in this User Manual depending on the virtual terminal being

used.

START UP

Power is continuously supplied to the job computer. The virtual terminal will give access to the job computer options and operation.

Figure 2-1: Master Screen - Crop Sprayer Mode

Matrix VT Setup Key

IC18 Crop Sprayer

Master Screen Key

Other options as available on

ISOBUS system

APPLICATION MODE

The IC18 job computer is programed to be either a sprayer or NH3 applicator. This setting has been established before leaving the factory,

but it can be changed after purchase with assistance from TeeJet Technologies Customer Service or your local dealer through the OEM

setup menu options.

Figure 2-2: Crop Sprayer

Cnt 1

5.0 42

470 l

bar

1.14 ha

+ 5%

1311

l/hakm/h

Figure 2-3: NH3 Applicator

Cnt 1

0.0

0 kgN 0.00 ha

+ 5%

1311

kg/min

kg/ha

km/h

kg/ha

This manual discusses specically the functions and options in Crop Sprayer Mode. See the specic IC18 NH3 User Manual for functions

and options in NH3 Mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

Teejet IC18 SPRAYER JOB COMPUTER Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Teejet IC18 SPRAYER JOB COMPUTER