Teejet IC18 SPREADER JOB COMPUTER Bedienungsanleitung PDF herunterladen (Seite 39)

www.teejet.com

ISOBUS Job Computer : IC18 Spreader NA

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

Keys Descriptions

Icon Description

Home Key Press to return to the Home Screen

Information Key Press to toggle between display modes

Start/Stop Key Press to start or stop spreader

Section and Icon Descriptions

Section or Icon Description

Job Information This information bar displays the active count number,

applied volume and applied area

Cnt 1 0 ton 0.00 ac

Count Number Displays the current active trip or job number

Applied Amount Displays amount applied for the selected count number

Applied Area Displays applied area for the selected count number

Speed/Application

Information

Displays vehicle speed or amount applied per minute or RPM.

The Information Key toggles between display modes.

Remaining Bed Contents Displays the remaining bed content

NOTE: If no bed sensor is fitted or the contents are not entered in the Filling Menu

prior to spraying, Bed Contents will display “0”.

Application Rate Displays the actual application rate per hectare/acre

NOTE: When the Master is “On” the actual application rate per hectare/acre will be

displayed. When the Master is “Off” the target rate is displayed.

Alarm

Displayed if an alarm condition is active

Roller RPM Displays the RPM of the belt roller

Spinner RPM Displays the RPM of the spinner

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Keine Kommentare

Teejet IC18 SPREADER JOB COMPUTER Bedienungsanleitung Seite 39