Teejet Matrix 840G User Manual Bedienungsanleitung PDF herunterladen (Seite 28)

98-05188 R2www.teejet.com

Figure 2-38: Boom Section Setup (SDM detected)

Overlap

Overlap determines the amount of overlap allowed when the boom

sections are turned on and off using BoomPilot.

1. Press OVERLAP ICON .

2. Press UP/DOWN ARROW ICONS to change between:

►0%

►50%

►100%

Press

►PAGE RIGHT ARROW to proceed to Delay On.

►BOOMPILOT/SINGLE BOOM SETUP TAB to return to

main Boom Section Setup screen.

Figure 2-39: Overlap

Figure 2-40: Examples of Overlap

100%

50%

Delay On

Delay On functions as a “look ahead” for establishing the timing

for the boom section valves to switch on exactly when entering an

area that has not been applied. If the boom turns on too soon when

entering a non-applied area, decrease the Delay On setting. If the

boom turns on too late when entering a non-applied area, increase

the Delay On setting. Range is 0.0 - 10.0 seconds.

1. Press DELAY ON ICON

2. Use the entry screen to establish delay time.

Press

►PAGE RIGHT ARROW to proceed to Delay Off.

►BOOMPILOT/SINGLE BOOM SETUP TAB to return to

main Boom Section Setup screen.

Figure 2-41: Delay On

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 66 67

Keine Kommentare

Teejet Matrix 840G User Manual Bedienungsanleitung Seite 28