Teejet RX 400p Bedienungsanleitung PDF herunterladen (Seite 113)

RX 400p

4-71 98-05044

4.16.1 Changing the Source of DGPS Corrections

To change the source of corrections used by the internal GPS sensor within the RX

400p receiver:



Using the or key, move the DGPS menu, located in the root menu, into focus

and press

. For example, when in WAAS mode, this menu will be called WAAS@.



Press to move the Configure@ menu item in focus and press .



If required, press to move the Diff@ menu item into focus and press .



Select the desired differential correction source (WAAS, OmniSTAR, beacon,

Extern RTCM, or Autonomous) using the

or keys and press .

4.16.2 Changing the Output Data Messages

To change data messages output by the RX 400p receiver:



Using the or key, move the GPS@ menu, located in the root menu, into focus

and press



Press to move the Configure@ menu item in focus and press .



Press to access the NMEA I/O@ menu.



Adjust the message output as necessary by moving the desired message into focus

using the

or key and press .



Adjust the output rate to that desired using the or key and pressing the

button.



Continue for each data message as required.

4.16.3 Changing the Baud Rates

To modify the baud rate of the RX 400p data ports:



Using the or key, move the Setup@ menu, located in the root menu, into

focus and press



Using the or key, move the Baud?Rates@ menu into focus and press .

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 150 151

Keine Kommentare

Teejet RX 400p Bedienungsanleitung Seite 113