Teejet SmartPad II Status Detect Guide Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computers Teejet SmartPad II Status Detect Guide herunter. TeeJet SmartPad II Status Detect Guide User Manual [pl] [cs] [en] [de] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Fieldware for SmartPad II v 4.02 Important Notice
Bulletin 98-01123 R1
Bulletin 98-01123 R1 Page 1 of 2
! IMPORTANT NOTICE !
Status Detect Revision for SmartPad II
“BLUE WIRE - Input 2”
Who will this affect?
1. Any operator using the SmartPad II and an existing switch in the cab to signal to the SmartPad II
that application has begun (Status Detect).
2. When Upgrading an existing Swath XL or Guideline system to the SmartPad II the operator will
need to Switch from the green wire to the BLUE wire for status detect.
How to use Status Detect
1. When using an existing switch in the cab to signal to the SmartPad II that application has begun, two
things must be done.
On the SmartPad, under the guidance setup menu the Status Detect option must be
set to 1 Section. See Page 2 of this bulletin for Status Detect setup to 1 Section.
See diagram below. When Status Detect is set to 1 Section 12v+ must be supplied to
Input 2 when applying. Connect Input 2 (Blue Wire) to the switched12v+ side of the
master switch (status switch) when the implement is applying.
INTERFACE
SMARTPAD
POWER
1
2
+V
5 Amp
®
S
HIF
T
CT
RL
2
N
D
A
L
T
C
A
P
S
C
H
G
L
O
W
B
A
T
12v+
(NOT USED) INPUT 1
WHEN STATUS DETECT IS ON
12v+ MUST BE SUPPLIED TO
INPUT 2 WHEN APPLYING
DER
NEERG
EULB
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - “BLUE WIRE - Input 2”

Fieldware for SmartPad II v 4.02 Important NoticeBulletin 98-01123 R1Bulletin 98-01123 R1 Page 1 of 2! IMPORTANT NOTICE !Status Detect Revision for Sm

Seite 2

Bulletin 98-01123 R1 Page 2 of 21. From the Main Launcher page (first screen after powering on) select Guidance by highlighting and pressing the enter

Kommentare zu diesen Handbüchern

Keine Kommentare