Teejet 834-P Sprayer Control Bedienungsanleitung PDF herunterladen (Seite 4)

834-P Sprayer Control TECHNOLOGIES

98-70028-R0 4

SPEED/RPM DISPLAY (GPT MODE)

In this display the shaft RPM is shown on the display.

Press the key to advance to the pressure display.

PRESSURE DISPLAY (GPT MODE)

In this display the pressure is shown in PSI.

Press the key to advance back to the rate display.

Normal Working Mode (GPA Mode)

Note: This section covers operation of the 834-P in Gallons Per Acre

mode. Instructions for Gallons Per Ton mode can be found on page 3.

INTRODUCTION

In the Gallons Per Acre (GPA) normal working mode, the display can show three different

pieces of information indicated by the LED’s below the display e.g.:

Application rate in GPA

Ground Speed

Pressure in PSI

Use of the keys during normal working mode is summarized as follows:

key is used to power ON and to select the information display

Auto/Man & key combination is used to power OFF (when not spraying)

and keys are used for changing the target application. In manual mode the

and keys drive the regulating valve to adjust pressure.

tip

select

GPA

GPT

SPEED

RPM

PSI

Inch

lbs/rot

PROGRAM MODE push 3 sec.

Gal/min

@40 psi

P/300ft

P/rot

MPH

RPM

min

tip

select

GPA

GPT

SPEED

RPM

PSI

Inch

lbs/rot

PROGRAM MODE push 3 sec.

Gal/min

@40 psi

P/300ft

P/rot

MPH

RPM

min

1 2 3 4 5 6 7 8 9 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Teejet 834-P Sprayer Control Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Teejet 834-P Sprayer Control