Teejet TASC-6500 Bedienungsanleitung PDF herunterladen (Seite 23)

2-13

98-05019

Rev- 1

TASC 6200/6500

CE & STANDARD VERSION

A. Use the following switch settings to adjust the Auto Power down time:

Power OFF

Mode selector SET-UP

Display selector % Rate

Hold the INC switch UP while turning the power on

The display will show the current Auto Power Down time.

B. Select the desired time using the INC/DEC switch.

C. Exit this set-up mode by moving the Display Selector to another position, the Mode Selector to OPERATE,

or turning the console OFF and back ON.

NOTE: The “Auto Power Down Feature is only available on the CE version of the console (CE designation label on

back of console). If you have the standard console model always turn the console power off when not in use to

prevent unnecessary drain on the battery.

2.15 OPERATING UNDER EXTERNAL RATE COMMANDS

When the TASC 6200/6500 console is operating under external rate commands, it must be connected to the com-

puter running the field mapping program, through a 405-0069-96V or 78-05007 Data Link. Minimum and maximum

rates must be programmed into the Rate Switch STANDARD RATE and ALT.-RATE positions respectively and the

Rate Switch must be placed in the Alt.-Rate position. The instructions received with the Data Link will explain in

more detail how to set up the control console and Data Link.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

Keine Kommentare

Teejet TASC-6500 Bedienungsanleitung Seite 23