Teejet IC18 SPRAYER JOB COMPUTER Bedienungsanleitung PDF herunterladen (Seite 34)

www.teejet.com

ISOBUS Job Computer : IC18 Sprayer

OVERVIEW SETUP APPENDIXGETTING STARTED OPERATION

Low Pressure Limit

Low Pressure Limit establishes the limit for the lowest allowed operating pressure for the selected nozzle type.

• To select the Low Pressure Limit, use the number pad or slide bar.

High Pressure Limit

Figure 3-21: Recommended Pressure Range bar and

High Pressure Limit on the Operating

Screen

High Pressure Limit establishes the limit for the highest

allowed operating pressure for the selected nozzle type.

• To select the High Pressure Limit, use the number

pad or slide bar.

Reference Flow

Reference Flow establishes the value for the volume

applied over a specic time (GPM or LPM).

• To select the Reference Flow, use the number pad or

slide bar.

Reference Pressure

Reference Pressure establishes the pressure value at

which the application rate is true (ISO=2 bar).

• To select the Reference Pressure, use the number

pad or slide bar.

IMPORTANT! Always refer to the nozzle pressure values

recommended by the supplier when setting the

nozzle pressure.

Factory Settings

Figure 3-22: Confirm Factory Settings

Factory Settings resets all nozzle settings to the default

settings for the selected nozzle size and type.

• To reset the Factory Settings, select FACTORY

SETTINGS KEY . A conrmation screen will be

displayed.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

Keine Kommentare

Teejet IC18 SPRAYER JOB COMPUTER Bedienungsanleitung Seite 34