Teejet Legacy 6000 Manual Bedienungsanleitung PDF herunterladen (Seite 105)

Chapter 4 - Operation100

Figure 4-29: Right-hand Approaching/Vehicle Tracking Slightly Right of Guideline

(Swath Mode)

Applied Area Detection

Fieldware detects when the vehicle has entered a previously-applied area and can

alsobeconguredtonotifytheoperatorwhenapproachingapreviouslymarked

hazard. To use applied area detection, the “Lightbar Setup -Alarm” menu eld

mustbeconguredpriortostartingguidance.RefertoCHAPTER2-LIGHTBAR

SETUP for additional information.

Previously Applied Area Detection

As a vehicle enters a previously applied area, the lightbar will display the message

“APPLIED” and the red stoplights will illuminate. If the vehicle continues product

application while driving in the applied area, the console alarm will sound. If prod-

uct application is terminated while in the applied area, the alarm will not sound.

Once the vehicle exits the previously-applied area, the red stoplights will turn off or

change to green once product application is resumed. The green illuminated stop-

light indicates that the vehicle is completely outside an applied area and product

application can commence.

Figure 4-30: Applied Area Detection

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 158 159

Keine Kommentare

Teejet Legacy 6000 Manual Bedienungsanleitung Seite 105