Teejet TASC-6100 Bedienungsanleitung PDF herunterladen (Seite 28)

2-12

TASC 6100

98-05018

CE & S

TANDARD VERSION

LIQUID ONLY SET-UP

SETTING THE CORRECTION FACTOR

(Pressure based (Pump L Psi (br)) only)

NOTE: The Correction Factor is locked at 1.00 when in

STnrd and rEFLO modes

f you are spraying water solutions, the correction

factor should be set to 1.00. If you are spraying a

solution with a specific gravity different than that of

water, adjust the correction factor according to the following

chart.

Weight of Solution Correction Factor

7.0 lbs/gal .92

8.0 lbs/gal .98

8.34 lbs/gal - Water 1.00

9.0 lbs/gal 1.04

10.0 lbs/gal 1.10

10.65 lbs/gal - 28% Nitrogen 1.13

11.0 lbs/gal 1.15

12.0 lbs/gal 1.20

14.0 lbs/gal 1.30

To enter the correction factor, set the console to the

following switch settings:

1. Power ON

2. Mode Selector SET-UP

3. Display Selector Application Rate

4. Use the INC./DEC. switch to adjust the correction

factor.

FLOW SENSOR CALIBRATION

Determining The Initial Calibration Number

The control console must be calibrated for the flow sensor

being used. The calibration number required by the control

console is the actual number of electrical pulses per unit

volume generated by the sensor, or, for the pressure sensor,

the gallons per acre rating of the nozzles being used. If you

have any doubts as to the accuracy of the application rate,

DISPLAY SELECTOR

Speed

Area Impl. Width

Distance

Test

Speed

PSI/Prime

Total Applied

Application Rate

OFF SET- UP DEC.

OPERATE INC.

Scan

Product Vol.

Fan RPM

BOOMS

123456789

% Rate

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

Teejet TASC-6100 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Teejet TASC-6100